Tree work requests for Longview, Kilgore, White Oak, Hallsville and Gladewater(903) 500-8993
Call
Menu

Tree trimming and pruning in Longview

Roof clearance, driveway clearance, dead wood, and limbs near wires.

Trimming in Longview usually means one of three jobs: getting limbs off the roof and gutters, raising the canopy over a driveway or street, or cleaning dead wood out of a big oak or pine before it drops on its own. Limbs near wires are a fourth case, and that one has rules.

Two workers in the basket of a tall aerial lift trimming a leafless tree against a blue sky
Stock photo: limbs being cut from an aerial lift.

Limbs near SWEPCO lines

SWEPCO describes its trimming process this way: its forestry department trims vegetation that interferes with the primary, secondary and neutral wires on its poles, working to arboriculture standards to clear limbs to a safe working distance. Crews typically cut back to a lateral branch and take about three years of growth each visit. The drop from the pole to your house is another matter: SWEPCO puts trees along that service line on the property owner.

Who handles which wire (SWEPCO, simplified)Primary, secondary and neutral wiresSWEPCO forestry handles trees in theseService line to the housethe property owner's jobEither way, SWEPCO says not to cut near lines yourself. Simplified, not to scale.
Simplified: SWEPCO's split between its pole wires and the customer's service line.

SWEPCO's advice is not to try cutting back trees near power lines yourself, and to report a tree problem to the utility instead. If a contractor needs the service line dropped to work safely, SWEPCO asks for at least two working days' notice to schedule a temporary disconnect. For transmission lines, the big lines on tall structures, SWEPCO's right-of-way brochure says it removes trees and woody plants where the wires are less than 100 feet off the ground, and that compatible plants allowed to stay should top out at no more than 15 feet.

Published prices

Lawn Love, national figures (updated October 16, 2026)
Tree heightCost per tree
Under 30 ft$80 to $420
30 to 60 ft$210 to $790
Above 60 ft$470 to $1,840

Lawn Love's national average is $412 to $612 a tree. By species it lists pines at $210 to $1,630 and oaks at $230 to $1,480. It notes that trees near power lines are harder and cost more to trim, without giving a figure.

Agreeing on the cut

Trimming quotes are easy to misread, so pin down the details:

  • Which limbs, and roughly how much of the crown will come out?
  • How much clearance over the roof, the drive or the street?
  • Is dead wood throughout the crown included, or just the limbs you pointed at?
  • Will the brush be chipped, hauled or left at the curb within the city's size limits?

Oaks: TxDOT's vegetation manual says oak wilt has been found in more than 60 Texas counties, mostly in Central Texas. If an oak is declining quickly, ask Texas A&M Forest Service before it's pruned.

Common questions

Will SWEPCO trim the tree over my service line?

SWEPCO says the property owner is responsible for trees interfering with the service line from the pole to the house. Its crews handle the primary, secondary and neutral wires on the poles.

Can SWEPCO turn off my service line for tree work?

SWEPCO says to contact it at least two working days ahead to schedule a temporary service disconnect.

What does trimming a big pine cost?

Lawn Love lists pines at $210 to $1,630 a tree and trees above 60 feet at $470 to $1,840, as national figures.

Get your trimming quoted

Phone the number or use the form; a tree contractor from the Longview area returns the call and arranges to see the job. There's no fee for asking.

Call (903) 500-8993

Voicemail picked up? Leave a name, the best number, where the property is, and whether the tree is leaning, dead or already down.

Get the tree priced

One local tree contractor gets these details and calls you back. How we handle them